The EE08 has been designed to provide accurate humidity / temperature measurement
over a wide working range in a small, flexible package. Two versions of the probe are available one with a dedicated cable and one with
a screw in connector.
This platform is designed for long term stability and operation in a wide range of challenging environments.
The sealed electronics and optional environmental coating on the sensor allow it to operate in environments usually unfriendly
to humidity sensors (e.g. exposure to salt air, ammonia, chlorine and condensing environments). Low power consumption and
short start-up time support efficient energy management for battery operated systems. Calibration data and other relevant functions
like linearization or temperature compensation are stored in the probe. This feature, together with the optional connector, allows
for easy replacement of the probe without a need for re-adjustment of the reading device (interchangeability).
Humidity and temperature measurement are available as analogue outputs (0-1/2.5/5/10V) or as a digital interface (E2-interface).
Easy implementation and data processing is warranted.
Humidity and temperature reading can be re-adjusted using the calibration software; available as an accessory.
The connection cable is part number HA011005. The interface software is free and can be downloaded from this
Also available is a screw in radiation shield mount to allow for accurate and stable outdoor measurements (Model: HA:010506)